1. the bidding conditions

The 4 gantry crane procurement project has been approved by the project approval / approval / filing authority, the source of project funds for its own funds, the tenderer is Tianjin Port Yuanhang International Ore Terminal Co., Ltd., the project is now open for bidding.

2. Project overview and bidding scope

Scale: 4 sets of gantry cranes purchased.

Scope: The bidding project is divided into 1 bidding section, the bidding content is to purchase 4 gantry cranes, the scope of supply is turnkey, including the design, manufacturing, assembly, transportation, loading and unloading, installation, commissioning, inspection, commissioning, on-site storage, insurance, risk, personnel training, on-site service, warranty and after-sales service of the goods proposed in the technical specifications. The main performance parameters of the equipment are as follows:

Rated total lifting capacity (t): 40 (below hook)

Lifting height(m)

Grab: 25 on the rail

Under Rail 19 (South 12 Berth)

Under Rail 21 (South 27 Berth)

The above data are measured under the condition of satisfying the 5 magnification grab operation.

Hook: 37 on rail

Orbit under 19

Track gauge (m) 12

Base distance (m) 12

Working amplitude(m):12.5~45 (from center of rotation)

Crane productivity (t/h) 600

Crane wind speed: the maximum wind speed in the working state is 20m/s

Crane wind speed: the maximum wind speed in non-working state is 55m/s

Crane wheel pressure: £45t

Crane door leg clearance: 9m

Tail swing radius: £9m

Crane power supply mode: South 12# berth AC6KV50HZ South 27# berth AC10KV50HZ

Drive and control mode: AC frequency conversion inverter speed regulation

3. Bidder qualification requirements

1. The qualifications, ability and reputation of the bidder

(1) Business license: The bidder shall have a business license or a legal person certificate of a public institution registered in the territory of the People's Republic of China, and within the business period or validity period, and have the corresponding supply capacity for this bidding project. If a branch of an independent legal person enterprise cannot participate in the bidding, it must issue a letter of authorization for the independent legal person enterprise, and each independent legal person enterprise can only send one branch to participate in the bidding.

(2) Qualification requirements: The bidder shall have a valid national special equipment production license, the licensed project includes hoisting machinery manufacturing (including installation, repair, and transformation), and the licensed sub-project includes gantry crane (B) and above qualifications. (Provide a copy of the certificate).

(3) Financial requirements: the financial situation is in good condition, and the property is not in a situation where the property is taken over or frozen. (Provide supporting materials that can objectively reflect the company's recent financial status, such as audited financial audit reports or bank certificates and other materials that are generally applicable to the industry.) ）

(4) Performance requirements: The bidder has implemented at least 5 similar project performances so far. (Provide a copy of the user list, contact number, sales equipment model, detailed specifications, contract and acceptance report)

(5) Credit requirements: (1) good, do not accept to be suspended or disqualified from bidding in accordance with the law; being ordered to suspend production and business, suspend or revoke permits, or suspend or revoke licenses; entering into liquidation proceedings, or being declared bankrupt, or otherwise incapacitated; Bidders who have major product quality problems in the past three years bid (provide a letter of commitment from the bidder). (2) (The bidder has no blacklist information in the national enterprise credit information publicity system (http://www.gsxt.gov.cn/index.html) (provide a screenshot of the web page query). (3) The bidder has not been included in the list of dishonest judgment defaulters on the "Credit China" website (www.creditchina.gov.cn) (provide a screenshot of the webpage query).

(6) Personnel requirements: 1 person in charge of the project, who is an employee of the unit. (Provide proof of social insurance payment issued by the social insurance center for any month within two months before the deadline for bidding; or a copy of the labor contract, which shall reflect the basic information of the signatory, the signature and seal of both parties, etc. ）

(7) Legal persons, other organizations or individuals who have an interest in the tenderer that may affect the fairness of the bidding shall not participate in the bidding.

If the person in charge of the unit is the same person or there is a holding or management relationship between different units, they shall not participate in the bidding of the same bidding section or the bidding of the same bidding project that has not been divided into bidding sections.

Note: The bidder shall provide a letter of commitment and proof of the equity structure of the unit, that is, the "Enterprise Credit Information Publicity Report" extracted from the National Enterprise Credit Information Publicity System (http://www.gsxt.gov.cn/index.html) reflects the "shareholder and capital contribution information" and "foreign investment information".

(8) Others: Manufacturers and agents shall not participate in the bidding at the same time, and the bidding shall be invalid if the provisions are violated. If more than one agent is entrusted to participate in the bidding, the bidding is invalid.

2. This tender does not accept consortium bids. If the consortium bids, the following requirements shall be met: / .

3. A manufacturer can only entrust one agent to participate in the bidding for the same brand and model of equipment.

4. Each bidder may bid on one of the above bids.

5. When the same bidder participates in the bidding of multiple bids for the same project, the maximum number of bids can be won.

6. Qualification review method: This bidding adopts the post-qualification review method.

In violation of the above provisions, the relevant bids are invalid.

Note: If the bidder is an agent, the "Manufacturer's Authorization Letter" shall be provided, and both the bidder and the manufacturer shall comply with the provisions of paragraphs 1.(3), (5) and (7) of this article.

Fourth, the acquisition of bidding documents

1. Acquisition time: from 09:00 on August 20, 2024 to 16:00 on August 26, 2024.

2. How to obtain:

The bidder can obtain it online after completing the registration on the electronic bidding and procurement management platform (https://tjgzcpt.ptacn.com/homepage) of Tianjin Port Group.

3. Acquisition Requirements:

(1) The bidder shall submit the wire transfer voucher for the information fee online.

(2) Each set of bidding documents is 1,500 yuan, which must be transferred by the public account, and the remittance must be remarked "project name + information fee", and other circumstances will not be accepted.

4. Information fee submission account information:

(1) Company name: Tianjin Gangbin Engineering Bidding Consulting Co., Ltd

Tax ID: 9112011672445020XG

Address: No. 11, Xingang Medical Street, Tanggu, Binhai New Area, Tianjin

(2) Accounts

Bank: Industrial and Commercial Bank of China Co., Ltd. Tianjin Xingang Branch

Account: 9558850302003294450

5. Submission of bidding documents

Submission deadline: 09:45 on September 9, 2024

Submission method: Tianjin Gangbin Engineering Bidding Consulting Co., Ltd., No. 11, Xingang Banyi Street, Tanggu, Binhai New Area, Tianjin, submitted paper documents in the bid opening room.

6. Time and place of bid opening

Bid opening time: 09:45 on September 9, 2024

Bid opening location: Tianjin Gangbin Engineering Bidding Consulting Co., Ltd., No. 11, Xingang Banyi Street, Tanggu, Binhai New Area, Tianjin.

7. Miscellaneous

1. Delivery time: After the contract comes into effect, the purchased equipment will be delivered to the designated place before December 31, 2024 according to the needs of Party A.

2. Place of delivery: Tianjin Port Yuanhang International Ore Terminal Co., Ltd. South 12 berths and South 27 berths.

3. If the time and place of submission and bid opening of the bidding documents of this project are inconsistent with the bidding documents, the content of the bidding documents shall prevail.

8. Supervision Department

If the bidder has any objection in the bidding process, please question it to the tenderer in accordance with the provisions of relevant laws and regulations. If there is still any objection to the tenderer's reply, the real-name complaint shall be made to the Procurement Service Center of Tianjin Port (Group) Co., Ltd. Contact number: 022-25706336, contact: Zhang Liping.

9. Contact information

Bidder: Tianjin Port Yuanhang International Ore Terminal Co., Ltd                        

Address: Nanjiang Port District, Tianjin Port                            

Contact: Li Shuang                            

Telephone: 022-25703405                             

Email:

Bidding agency: Tianjin Gangbin Engineering Bidding Consulting Co., Ltd

Address: Tianjin Binhai New Area, Tanggu Xingang Office Medical Street, No. 11 Bidding Department II

Contact: Wang Zhaohui

Phone: 022-25706027

email: gangbintbbm2020@163.com

Source: Port Machinery and Equipment